LOGO.3 Panel 240 x 340 cm

The LOGO. 3 large-size panel 240 x 340 cm is a formwork panel in the PASCHAL LOGO.3 formwork range.

Measuring 240 x 340 cm, it acts as the basic panels for formwork heights of 2.40 m and 3.40 m, along with the large-size panel 340 x 270 cm and the midi-panels. In addition to the extremely strong, profiled flat steel frame, the panel comprises a birch plywood sheet which is supported by seven multifunctional top hat profiles.

• Made of profiled, very strong flat steel
• 16 mm Finnish birch plywood, 12 ply
• Fresh concrete pressure absorption of 70 kN/m² compliant with DIN 18218
• Ideal for exposed concrete due to the narrow frame imprint in the concrete
• Save on tie points by positioning the large-size panels conveniently in the ground plan
• Safe and rapid connection with the wedge clamp
• Compliance with maximum safety standards thanks to Multip and the lateral protection system Secuset
• A crane is required to move the panels
• Continuous plywood with 8.16 m²
• LOGO.3 is also available in your corporate colours
• Transponders for clear identification
• Vertical and horizontal use for formwork heights of 2.20 m and 3.40 m

Application information

The PASCHAL LOGO.3 large-size panels 240 x 340 cm can be used whenever large-size formwork is required. Only very few connecting pieces are required for these panels, resulting in outstanding forming times. The combination of formwork heights of 2.40 m and 3.40 m also offers numerous benefits.

The targeted use of compensation and large-size panels can save on tie points. In addition, the LOGO.3 large-size panel 240 x 340 cm satisfies stringent requirements for concrete surfaces: The continuous plywood results in a great formwork look for exposed concrete.
The integrated clamp holders in the LOGO.3 large-size panels enable accessories to be attached even quicker, as the connecting pieces are always at hand.

Comprehensive occupational safety

Thanks to its ease of use, the lateral protection system Secuset can be installed safely and efficiently on formwork. The LOGO concreting platform and the multifunctional Multip working platform ensure safe working levels as well as safe ascents and descents.

Special features of the 340 cm-high panel

The 340 cm-high LOGO panel has holes for ties at the same height as the 270 cm LOGO panel. The 270 cm-high panel can therefore be located opposite the 340 cm-high panel and braced using tie rods. This formwork that is higher on one side can then be used as slab edge formwork. This option is used particularly often for lift cores. Outer formwork of 270 cm, inner core formwork of 340 cm, this then remains in the lift core as slab edge formwork up until the slab formwork is concreted.

Two tie points are sufficient for the panel height for concreting heights up to 340 cm. If the 340 cm-high LOGO panel is extended in height, the number of tie points is increased to just three for the panel height.

LOGO.3 satisfies customer requirements

To increase your recognition value, the PASCHAL LOGO.3 formwork can be produced in your corporate colours on request. In addition, thanks to the PASCHAL ident technology, our transponders uniquely identify each LOGO.3 panel.

Please refer to the technical information for further system benefits.