Filler post 6 x 150 cm

The filler post 6 x 150 cm is a formwork panel from the Modular/GE universal formwork range of PASCHAL.

Measuring 6 x 150 cm, together with the panel 5 x 150 cm, it creates the filler posts for a formwork height of 1.50 m. In addition to the extremely strong, flat steel frame, the filler panel comprises seven bracings and a steel facing. It features a continuous oblong hole and additional tie point.

• Made of strong, solid flat steel
• Steel facing
• Lightweight - can be used as manual formwork
• Save on tie points
• Enables height offsetting for Modular universal formwork/GE
• Safe and rapid connection with the keybolt
• Allows work to be performed without the need for a crane
• Low storage and transport volumes
• High frequency of use
• Diverse application options
• Can be used as a connecting piece for NeoR lightweight formwork

Information on use

The filler post 6 x 150 cm enables formworking with centimetre precision. With the filler post you can expand your formwork to any dimensions, this not only saves materials but also time, resulting in very good formworking times.

If the filler post is clamped between two grid panels, clamping points can be saved. Instead of clamping on the left and right side of the compensation element, it is clamped through the compensation element. The fastening to grid elements is done by means of connecting bolts. In addition, the compensating element also has the half-beads, which enable tensioning on both sides.

Problem-free height offsetting of the formwork panels

The oblong holes on the filler post 6 x 150 cm allow infinitely height-adjustable connection of Modular or GE panels as the arrangement of the key holes is not binding. The filler post 6 x 150 cm is installed between the two panels that are to be positioned. To allow the tie rod to be positioned at the panel joint, the filler post is placed level with the height of the underlying panel. As such, two panels can be simply and easily clamped despite a difference in height.

Handy connecting piece for NeoR lightweight formwork

The filler post 6 x 150 cm also acts as a connecting piece for the NeoR lightweight formwork as the oblong hole in the side of the filler post means that the NeoR panels can be bolted to the Modular/GE universal formwork very easily using keybolts.

Please refer to the technical information for further system benefits.