Modular plastic filler piece 2 x 75 cm

The modular plastic filler post 2 x 75 cm is a plastic filler piece from the Modular/GE universal formwork range from PASCHAL.

Measuring 2 x 75 cm, together with the filler pieces 1/3/4/ cm, it forms the plastic filler pieces for the formwork height 0.75 m. The plastic filler piece cuts out time-consuming  on-site dimension adjustments on the construction site. Moreover, the PASCHAL plastic filler pieces are made completely from recycled materials, i.e., they are produced in an environmentally friendly way.

• Made of polyethylene (recycled material)
• Saves both time and material for rapid formwork times
• Durable and dimensionally stable
• Smooth surface
• Barely visible in concrete due to the surface finish which is similar to plywood.
• Available in all formwork heights
• Secured using standard connecting pieces
• The plastic filler pieces can also be screwed in as an alternative.
• Fully compatible with all common formwork systems on the market.

Information on use

The PASCHAL modular plastic filler piece 2 x 75 cm enables systematic formworking with centimetre-level precision. With the plastic filler piece you can expand your formwork to any dimensions, this not only saves materials but also time, resulting in very good formworking times.

Our modular plastic filler piece is available in all formwork heights and is compatible with all common formwork systems.

Durable and simple application

The plastic filler piece is extremely durable and dimensionally stable which means it can be used time and time again. With its smooth surface it is very easy to clean. The surface finish of the plastic filler piece is similar to that of a film-coated formwork plate which means that imprints in the concrete are avoided.

When using the plastic filler piece, no rails or other on-site additions are required for attachment.

Simple fastening with standard connecting pieces

The plastic filler piece can be fastened onto the panel with the 5-pin keybolt. The 5-pin keybolt is placed into the three holes in the panel frame provided for the connection and in the plastic filler pieces and then rotated by 90° (similar to normal keybolts). Compensation widths of 5 cm can be achieved by combining filler pieces measuring 2 cm and 3 cm. They must be installed in such a way that the tie rod grooves of the filler pieces are opposite each other so that the tie rod can be guided between these fillers.

Please refer to the technical information for further system benefits.

 Discover now virtually

 Watch our product video